Neue Fernbedienung anlernen / Raspberry PI 3 / MLD 5.x

Mögliche LIRC Tastennamen: /etv/vdr/remote.conf

LIRC.Up KEY_UP
LIRC.Down KEY_DOWN
LIRC.Menu KEY_MENU
LIRC.Ok KEY_OK
LIRC.Back KEY_ESC
LIRC.Left KEY_LEFT
LIRC.Right KEY_RIGHT
LIRC.Red KEY_RED
LIRC.Green KEY_GREEN
LIRC.Yellow KEY_YELLOW
LIRC.Blue KEY_BLUE
LIRC.0 KEY_0
LIRC.1 KEY_1
LIRC.2 KEY_2
LIRC.3 KEY_3
LIRC.4 KEY_4
LIRC.5 KEY_5
LIRC.6 KEY_6
LIRC.7 KEY_7
LIRC.8 KEY_8
LIRC.9 KEY_9
LIRC.Info KEY_INFO
LIRC.Play KEY_PLAY
LIRC.Pause KEY_PAUSE
LIRC.Stop KEY_STOP
LIRC.Record KEY_RECORD
LIRC.FastFwd KEY_FASTFORWARD
LIRC.FastRew KEY_REWIND
LIRC.Next KEY_NEXT
LIRC.Prev KEY_BACK
LIRC.Power KEY_POWER2
LIRC.Channel+ KEY_CHANNELUP
LIRC.Channel- KEY_CHANNELDOWN
LIRC.PrevChannel KEY_PREVIOUS
LIRC.Volume+ KEY_VOLUMEUP
LIRC.Volume- KEY_VOLUMEDOWN
LIRC.Mute KEY_MUTE
LIRC.Audio KEY_MODE
LIRC.Subtitles KEY_SUBTITLE
LIRC.Schedule KEY_EPG
LIRC.Channels KEY_CHANNEL
LIRC.Timers KEY_TIME
LIRC.Recordings KEY_PVR
LIRC.Setup KEY_SETUP
LIRC.Commands KEY_FAVORITES
LIRC.User0 KEY_TEXT
LIRC.User1 KEY_PROG1
LIRC.User2 KEY_PROG2
LIRC.User3 KEY_PROG3
LIRC.User4 KEY_PROG4
LIRC.User5 KEY_AUDIO
LIRC.User6 KEY_VIDEO
LIRC.User7 KEY_IMAGES
LIRC.User8 KEY_FN
LIRC.User9 KEY_SCREEN

LIRC Device: /dev/lirc0
LIRCD Konfigurationsdatei: /etc/lircd.conf
LIRCD Socket: /var/run/lirc/lircd-GPIO

stop vdr
stop lirc
modprobe lirc_rpi
irrecord -d /dev/lirc0 lircd-new.conf
cp lircd-new.conf /etc/lircd.conf
rmmod -a lirc_rpi
start lirc
start vdr


begin remote

name Philips_9603
bits 8
flags RC6|CONST_LENGTH
eps 30
aeps 100

header 2711 900
one 437 460
zero 437 460
pre_data_bits 13
pre_data 0xED8
gap 107724
min_repeat 1
# suppress_repeat 1
# uncomment to suppress unwanted repeats
toggle_bit_mask 0x10000
rc6_mask 0x10000

begin codes
KEY_UP 0xA7
KEY_DOWN 0xA6
KEY_MENU 0xAB
KEY_OK 0xA3
KEY_ESC 0xF5
KEY_LEFT 0xA5
KEY_RIGHT 0xA4
KEY_RED 0x92
KEY_GREEN 0x91
KEY_YELLOW 0x90
KEY_BLUE 0x8F
KEY_0 0xFF
KEY_1 0xFE
KEY_2 0xFD
KEY_3 0xFC
KEY_4 0xFB
KEY_5 0xFA
KEY_6 0xF9
KEY_7 0xF8
KEY_8 0xF7
KEY_9 0xF6
KEY_INFO 0xF0
KEY_PLAY 0xD3
KEY_STOP 0xCE
KEY_RECORD 0xC8
KEY_FASTFORWARD 0xD7
KEY_REWIND 0xD6
KEY_CHANNELUP 0xDF
KEY_CHANNELDOWN 0xDE
KEY_EPG 0x33
end codes

end remote

begin remote

name Harmony_VDR
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100

one 896 865
zero 896 865
plead 905
gap 115789
min_repeat 2
# suppress_repeat 2
# uncomment to suppress unwanted repeats
toggle_bit_mask 0x800

begin codes
KEY_UP 0x17E0
KEY_DOWN 0x17E1
KEY_MENU 0x17CD
KEY_OK 0x17E5
KEY_ESC 0x17DF
KEY_LEFT 0x17D1
KEY_RIGHT 0x17D0
KEY_RED 0x17CB
KEY_GREEN 0x17EE
KEY_YELLOW 0x17F8
KEY_BLUE 0x17E9
KEY_0 0x17C0
KEY_1 0x17C1
KEY_2 0x17C2
KEY_3 0x17C3
KEY_4 0x17C4
KEY_5 0x17C5
KEY_6 0x17C6
KEY_7 0x17C7
KEY_8 0x17C8
KEY_9 0x17C9
KEY_PLAY 0x17F5
KEY_PAUSE 0x17F0
KEY_STOP 0x17F6
KEY_RECORD 0x17F7
KEY_FASTFORWARD 0x17F4
KEY_REWIND 0x17F2
end codes

end remote

There is 1 comment in this article:

  1. 01/11/2017Thomas says:


    # Philips STB

    begin remote

    name lircd.conf
    bits 8
    flags RC6|CONST_LENGTH
    eps 30
    aeps 100

    header 2711 900
    one 437 460
    zero 437 460
    pre_data_bits 13
    pre_data 0xED8
    gap 107724
    min_repeat 1
    # suppress_repeat 1
    # uncomment to suppress unwanted repeats
    toggle_bit_mask 0x10000
    rc6_mask 0x10000

    begin codes
    KEY_UP 0xA7
    KEY_DOWN 0xA6
    KEY_MENU 0xAB
    KEY_OK 0xA3
    KEY_ESC 0xF5
    KEY_LEFT 0xA5
    KEY_RIGHT 0xA4
    KEY_RED 0x92
    KEY_GREEN 0x91
    KEY_YELLOW 0x90
    KEY_BLUE 0x8F
    KEY_0 0xFF
    KEY_1 0xFE
    KEY_2 0xFD
    KEY_3 0xFC
    KEY_4 0xFB
    KEY_5 0xFA
    KEY_6 0xF9
    KEY_7 0xF8
    KEY_8 0xF7
    KEY_9 0xF6
    KEY_INFO 0xF0
    KEY_PLAY 0xD3
    KEY_STOP 0xCE
    KEY_RECORD 0xC8
    KEY_FASTFORWARD 0xD7
    KEY_REWIND 0xD6
    KEY_CHANNELUP 0xDF
    KEY_CHANNELDOWN 0xDE
    KEY_EPG 0x33
    end codes

    end remote

Write a comment: